od Sbormistr » 21.10.2018 20:56
Installation method using installer wolfplus_v4.1f.exe:
1. Start the EXE file and choose a language - The default is English
2. Set the path to the memory, where you will install
3. Choose "Full installation" and the type of your processor - This step is important because EXE copies the different .dll files for the different processors:
a) ARM b) MIPS CPU c) PC / intel / amd / cpu
4. Set the path to the appropriate programs - if any. If the programs are added later, the paths are done by .ini and can also be from the menu of the already installed WolfNCU.
5. Uncheck the option "Whether to replace the file"
6. Running the installation and Finish
7. After Finish must be copy the folder Skin from:
This folder is SDMMC\WolfNCU\Skin
and replace the existing one, because it is empty!
After finishing, you must change all values in .ini and set yours!
By default, they are GpsPort=COM2 and GpsSpeed=9600
Niro 1.6 GDI HEV Exclusive + Premium Paket 2017
Sportage III 2.0 CRDI 4x4 Exclusive 2011-prodáno 2022 Cee'd SW 1.4 CVVT 2007- prodáno 2018Když všechno zklame, přečti si návod